- for the other models (K550, K610, K618, K770, K790, K810) you must use firmware for the respective model .
example: for K550 you must use a k550 firmware (k550.mbn +k550.fbn+k550CDA.zip )
K550_R6BD001_MAIN_GENERIC_LM_RED52.mbn - this is Main firmware (.mbn)
K550_R6BD001_FS_I_MODE_2_RED52.fbn - this is File System (.fbn)
k550I_HB1-06_Gen_CDA102568_4_R8A_GENERIC_MEDITERR.zip - This is CDA (.zip) also known as customization
this can be done only FOR CID52 - IF u have cid 49 or 51 just upgrade it via XS ++ or setool2 lite 1.11 .
Do NOT SEUS cos upgrades it to cid 53 and that's bad !!
and first of all you have to make a back-up of your GDFS
UNLOCK with setool 1.11 + qamaker + simUnlock patch generator
Required :
1 . make sure that you installed the USB FLASH DRIVERS
2 . Setool2 lite 1.11 + Qamaker
3 . SimUnlock Patch Generator
DB2020 is unlocked in 3 steps
1.Cracking the MAIN with quick access patch.vkp so you can use patches and unlock it or other patches.
-in setool 1.11 is a folder QAMAKER
-in it is qamaker.exe
-drag the MAIN "K800_R8BA024_MAIN_GENERIC_WI_RED52.mbn" over "qamaker.exe" and it will create an" quick_access_K800_R1KG001.vkp " in QAMAKER folder .
-start setool lite1.11 and choose phone type k800
-at " MISC FILES" on "..." select the "quick_access_K800_R1KG001.vkp "
-tag bypass db2020
-click on ADD and select the MAIN "K800_R8BA024_MAIN_GENERIC_WI_RED52.mbn"
-CLICK FLASH - up right in setool .
-Press& hold C on the phone's keyboard , count to 3 and insert usb cable
-in a few moments it will tell you to remove the USB , battery /put it back , PRESS READY in setool and PLUG THE USB IN again .
-after a few minutes it will apear a popup - select NO to apply the patch
and is done ( elapsed xxx -seconds)
2. Generating the UNLOCK patch with SimUNLOCK patch generator
-start SIMUNLOCK patch generator
-choose the MAIN "K800_R8BA024_MAIN_GENERIC_WI_RED52.mbn"
-click on make patch (generate)
finished .
the unlock patch will be in simUNLOCK folder .
3. WRITING THE UNLOCK PATCH and UNLOCK THE PHONE .
-Run Setool.
-select phone type k800.
-At MISC FILES select the UNLOCK patch.vkp
-tag "use quick access patch"
-Press "WRITE SCRIPT".
-When the program ask to select YES to remove patch or NO to apply patch ,you press NO.
-Now you wait untill you see next message: Elapsed ___sec.
K800i PHONE UNLOCKED !!!
put in the desired simcard and start your phone
The credits goes all to the website that made this tutorial and allowed us to post it here .
http://www.modmy-forum.com
