YOU MUST SAVE (BACKUP ) YOUR GDFS BEFORE STARTING TO MOD OR FLASH YOUR PHONE
- With setool2lite
2. On Phone model choose your phone model
3. close phone and remove phone card and sim card
4. Press READ GDFS not other button ..
6. Plug usb cable holding key "c"
7. WEN PROGRAM WILL REQUEST remove data cable and battery of it, and put them back to the place (holding key "c") and then, press READY.
DONE!!!
YOU WILL FIND YOUR GDFS IN SETOOL FOLDER ( gdfsxxxxxxxxxx.bin )
- With xs + +3.2
2.turn off the phone and remove phone card and batery from it
3.Press "Connect" (xs + +)
4.Plug data cable holding key "c"
5.Check section of the GDFS bottom right of the program
6.Press BACKUP GDFS
7.wait until these message will appear: disconected, unplug the phone
If you did not bakup your GDFS, the next tutorial it will not be useful.
RESTORING GDFS
- With setool2lite
2.On Phone model choose your phone model
3.On misc file choose the GDFS (a file format: gdfs_xxxxxxxxxxxxxx.bin, which we found in the folder where you copied setool, if you do back-up with setool)
4.close phone and remove phone card and sim card
5. Pres Write GDFS
6.Plug usb cable holding key "c"
7.WEN PROGRAM WILL REQUEST remove data cable and battery of it, and put them back to the place (holding key "c") and then, press READY.
DONE!!!
- With xs + +3.2
2.turn off the phone and remove phone card and batery from it
3.Press "Connect" (xs + +)
4.Plug data cable holding key "c"
5.Check section of the GDFS bottom right of the program
6.On GDFS Script put the file format: gdfs_xxxxxxxxxxxxxx.bin
7.Press Run script
8.wait until these message will appear: disconected, unplug the phone
the log should look like these one:
10:28:20| Attempting to open the interface...
10:28:20| TURN OFF PHONE!
10:28:20| Hold 'C' button on phone and connect phone NOW.
10:28:20| You have 30 seconds...
10:28:20|
10:28:30| Disconnected... Unplug the phone
11:29:21|
11:29:21| Attempting to open the interface...
11:29:21|
11:29:21| TURN OFF PHONE!
11:29:21| Hold 'C' button on phone and connect phone NOW.
11:29:21| You have 30 seconds...
11:29:21|
11:29:43| Baseband ID: 8040
11:29:43| Protocol Version: 3.1
11:29:43|
11:29:43| Sending db2010_cid00_prodid_p3l.bin...
11:29:43| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L
11:29:43| This is a PRODUCTION_ID loader
11:29:43| Activating GDFS...
11:29:44| Phone name detected!
11:29:44|
11:29:44| Profiling SEMC phone...
11:29:44| Platform: DB2010
11:29:44| OTP CID: 49
11:29:44| EROM CID: 49
11:29:44| EROM Color: Red
11:29:44| IMEI: 35233701xxxxxx
11:29:44| Phone ID: W810
11:29:44| Region: ORANGE_GEN
11:29:44| CDA: CDA102555/4 R2A
11:29:44| Firmware Version: R4ED001
11:29:44| EROM: n/a
11:29:44| Ready for operation!
11:30:04| Sending db2010_cid49red_cs_r3a010.bin...
11:30:06| Applet ID: 070524 1030 AN2CXC1327364_COMPACT_SEMC_CS_LOADER__R3A010
11:30:06| This is a CHIPSELECT loader
11:30:06| Activating loader...
11:30:06| Activating GDFS...
11:30:37| This loader is UNLOCKED
11:30:37| Backing up the GDFS...
11:30:40| Stated variables: 1493
11:30:46| Variables found: 821
11:30:51| Variables found: 393
11:30:54| Variables found: 279
11:30:54| Wrote backup to .\Backup\W810_35233701xxxxxx_GDFS_BACKUP.bin
11:30:54| GDFS was backed up successfully!
11:30:54| GDFS operation was successful
11:30:56| Disconnected... Unplug the phone
11:31:09| Shutting down...
11:31:37| XS++ v3.2 Dev1 (Crystal) Ready !
11:31:37| Executed on Microsoft Windows XP
